Small parts safety testing is a fundamental mechanical safety evaluation that determines whether toys and children's products pose choking, aspiration, or ingestion hazards to children under three years of age. Performed by accredited third-party laboratories in accordance with ASTM F963, EN 71-1, ISO 8124-1, and GB 6675 standards, this test is a mandatory requirement for toy market access in the United States, the European Union, China, and most international markets. This article explains the technical principles, sample requirements, test procedures, evaluation criteria, and regulatory applications of small parts safety testing for toys.
Technical Overview
Small parts safety testing, also known as the small parts cylinder test or choking hazard test, evaluates whether a toy, toy component, or liberated fragment can fit entirely inside a standardized test cylinder that approximates the dimensions of a young child's throat. Because children under 36 months instinctively explore objects with their mouths, detachable components and breakable fragments remain one of the leading causes of toy-related choking, aspiration, and ingestion injuries in this age group.
The test is required by the world's principal toy safety standards, including 16 CFR 1501 and ASTM F963 in the United States, EN 71-1 in the European Union, ISO 8124-1 on the international level, and GB 6675.2 in China. Although the regulatory frameworks differ, the technical principle and test apparatus are essentially harmonized: any object that fits completely within the small parts cylinder is classified as a hazardous small part for children under three years of age.
Testing is applied under two conditions: first, on the toy in its as-received state, and second, on the toy after simulated, reasonably foreseeable abuse such as drop, torque, tension, impact, and compression loading. This dual approach verifies that hazardous components are neither present at purchase nor liberated during typical play and rough handling.
Testing Samples
Finished Toys As Received
Complete toys sampled from production or retail are tested in the exact condition in which they are sold, including any attached accessories, spare components, and promotional items supplied in the packaging. Samples must be representative of the production batch and free from pre-test damage.
Components and Accessories
Individual detachable elements are separately evaluated, such as plastic eyes and noses on stuffed toys, buttons, wheels, beads, small figures, squeakers, bells, snap-fit parts, magnets, and any component a child could grasp, twist, or pull free.
Post-Abuse Test Specimens
Toys that have completed the full abuse test sequence are examined, and every liberated component, broken fragment, and shattered piece is collected and individually subjected to the small parts cylinder test. Fragments that pass the cylinder test after abuse indicate a potential safety failure.
Pre-Production Prototypes
Design-stage parts, first articles, and engineering prototypes may be submitted before tooling is finalized. Early-stage testing allows manufacturers to correct attachment methods, material thickness, and structural design before mass production, reducing compliance risk and costly redesign.
Testing Items
A complete small parts safety evaluation typically consists of the following test items, which together simulate both normal play and foreseeable abuse:
- Small parts cylinder test in the as-received condition, per 16 CFR 1501, EN 71-1, ISO 8124-1, and GB 6675.2
- Small parts cylinder test after abuse testing, applied to all liberated components and fragments
- Drop test, for example ten consecutive drops from 1.37 m for toys intended for children up to 18 months and from 0.91 m for ages 19 to 96 months, in accordance with ASTM F963
- Torque test, applying 0.34 N·m torque or a 180-degree rotation, whichever is reached first, held for five seconds in each rotational direction
- Tension test, applying a 70 N pulling force to graspable protrusions, components, and seams
- Impact test, dropping a 1 kg weight from a height of 100 mm onto accessible weak points
- Compression test, applying a 110 N static load to accessible flat or convex surfaces
- Age grading verification and review of required warning statements and labeling
EN 71-1, ISO 8124-1, and GB 6675.2 specify comparable abuse sequences with slightly different parameters, and the applicable standard is selected according to the target market of the toy.
Testing Methods
Test Apparatus
The small parts cylinder is a standardized test fixture with an interior diameter of 31.7 mm (1.25 inches) and a depth ranging from 25.4 mm (1 inch) to 57.1 mm (2.25 inches), with a slanted bottom. Its geometry is derived from physiological studies of the airway dimensions of young children and is identical across the major international standards.
Test Procedure
- Condition the samples to the temperature and humidity requirements of the applicable standard before testing.
- Complete the relevant abuse tests first, and collect all components and fragments released from the toy.
- Orient each component, fragment, or as-received part in its most favorable orientation for entry into the cylinder.
- Place the part over the opening of the cylinder and allow it to settle under its own weight; no external force or pushing is permitted.
- Determine whether the part is entirely contained within the cylinder, with no portion projecting above the plane of the rim.
Evaluation Criteria
- If a part fits entirely within the cylinder, it is classified as a small part and constitutes a potential choking, aspiration, or ingestion hazard.
- Toys intended for children under 36 months must not produce any small parts, either as received or after abuse testing; a single failure results in non-compliance.
- Toys intended for children from 37 to 96 months may contain small parts only if the required choking hazard warnings and age labeling are applied.
Applications
Small parts safety testing is a gatekeeping requirement for regulatory compliance, product certification, and commercial quality control across major markets:
- United States market access under the CPSIA, which mandates third-party testing to ASTM F963 and 16 CFR 1501 as the basis for a Children's Product Certificate
- European Union CE marking under the Toy Safety Directive, supported by conformity assessment to EN 71-1
- China Compulsory Certification for designated toy categories, based on the GB 6675 national standard series
- International market acceptance where ISO 8124-1 serves as the reference standard or the basis for national regulations
- Correct age grading decisions and application of statutory warning statements, such as choking hazard warnings for toys containing small parts
- Design verification, incoming material control, mass-production surveillance, and failure analysis after consumer incidents or regulatory recalls
Beyond conventional toys, the small parts principle is also applied to children's products such as rattles, crib toys, childcare articles, and novelty items that are likely to be used by children under three years of age.
FAQ
What exactly counts as a "small part"?
A small part is any object, component, or fragment that fits entirely within the standardized test cylinder with an interior diameter of 31.7 mm and a depth of 25.4 mm to 57.1 mm, when tested under gravity alone and without forcing. This includes whole toys that are small, components that detach during abuse testing, and fragments produced by breakage.
Which toys must undergo small parts testing?
All toys intended for children under 36 months must be free of small parts, both before and after abuse testing. Toys intended for children aged 37 to 96 months that contain small parts are permissible only with the required warning labels. Age grading must be substantiated by the manufacturer and is subject to review by regulators.
Why is the test performed both before and after abuse testing?
The as-received test confirms the product is safe at the point of sale, while the post-abuse test confirms safety under foreseeable rough play. A toy can pass initially but fail if a plastic eye, wheel, or brittle component detaches or shatters during drop, torque, tension, impact, or compression loading.
Are there any exemptions?
Certain articles are exempted or treated differently under 16 CFR 1501, such as paper, fabric and textile pieces, writing materials including crayons and chalk, and some children's books. Exemption scope varies by regulation, so the applicable standard should always be confirmed before relying on an exemption.
What happens if a toy fails the test?
Common corrective actions include redesigning the attachment method, increasing material thickness or impact resistance, replacing brittle materials, enlarging components beyond the cylinder dimensions, or re-grading the toy to an older age group with appropriate choking hazard warnings. Corrected designs must be retested before certification.
Where should the testing be conducted?
Testing should be performed by accredited third-party laboratories with competence in toy safety standards, for example laboratories holding ISO/IEC 17025 accreditation and, for the United States market, laboratories recognized under the CPSC accepted testing program. Using a qualified laboratory ensures results are accepted for regulatory submissions and certification.
Why Choose ZKGX?
- State-of-the-art analytical equipment
- Highly qualified scientific team
- Fast turnaround time
- Competitive pricing